File:Capp Printer Room.jpg

Size of this preview: 800 × 600 pixels. Other resolution: 2,560 × 1,920 pixels.

Original file (4,000 × 3,000 pixels, file size: 3.34 MB, MIME type: image/jpeg)

Summary

Photo of the active 3D printers in the Capp location.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	23:02, 13 January 2022		4,000 × 3,000 (3.34 MB)	Jonah (talk \| contribs)	Photo of the active 3D printers in the Capp location.

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	samsung
Camera model	SM-F926U1
Exposure time	83,337/1,250,000 sec (0.0666696)
F Number	f/1.8
ISO speed rating	125
Date and time of data generation	18:11, 8 January 2022
Lens focal length	5 mm
Latitude	37° 45′ 44.52″ N
Longitude	122° 25′ 6.19″ W
Altitude	21.4 meters below sea level
Width	4,000 px
Height	3,000 px
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
File change date and time	18:11, 8 January 2022
Y and C positioning	Centered
Exposure Program	Normal program
Exif version	2.2
Date and time of digitizing	18:11, 8 January 2022
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	3.906
APEX aperture	1.69
APEX brightness	0.23
APEX exposure bias	0
Maximum land aperture	1.69 APEX (f/1.8)
Metering mode	Center weighted average
Flash	Flash fired
DateTime subseconds	021492
DateTimeOriginal subseconds	021492
DateTimeDigitized subseconds	021492
Supported Flashpix version	1
Color space	sRGB
Sensing method	Undefined
Scene type	A directly photographed image
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	24 mm
Scene capture type	Standard
GPS time (atomic clock)	02:11
GPS date	9 January 2022