User:Rando/Gain Clone Notes

From Noisebridge
Revision as of 15:42, 5 January 2019 by Rando (talk | contribs) (Created page with "* swap out audio receiver for car amp thing * Fest autio streaming with mic, cabinet audio, and stream audio * Found a woofer to test with (tbd) * Impedance matching circui...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • swap out audio receiver for car amp thing
  • Fest autio streaming with mic, cabinet audio, and stream audio
  • Found a woofer to test with (tbd)
  • Impedance matching circuit

Gainclones are a DIY version of a $3000 audio system called the GainCard.

NGALAC possesses a LM3886TF based dual supply amp which requires a split rail +28/-28 DC supply

Amazon Link

LM3886TF based gainclone amp


Example DIY circuits which are easy to build with clear instructions

Example Circuits

Error creating thumbnail: Unable to save thumbnail to destination

Example PSU design

DIY PSU price is very high, will compare to purchase options
Using computer PSU may be possible after boosting +/-12 to +/-28, however, current on -12V line may not be enough to rate maximum wattage


Possible DIY Design
Qty Short Name Price Part Link Part Total
1 Transformer Dual 28V secondaries, 4.6A Max current $28.00 VPS56-2300 Digikey $28.00
16 Diode $1.00 MUR860 Digikey $16.00
4 Linear Voltage Regulator $2.10 LM338T Digikey $9.00
8 Rectifier Diode $0.20 LM4002 Digikey $1.60
4 1200uF Radial Aluminum Electrolytic Caps $1.00 - $6.00 (depending on current) EEU-FS1J102B Digikey $24.00
* Various Caps and Resistors (1W) $10.00 * * $10.00
Total $95.00