Conductive Paint Lessons

Lessons on Conductive Paint

Related to Pulse Choker Hack Notes for July 15th, 2009:

"We tried silk screening silver conductive paint (MGchemicals 842-20G) onto two different types of fabric, a water resistant one and a water proof "leather like" one. Both showed very high resistance (higher than the meter can read) even for very short thick traces. It looks really cool though - hopefully we can figure out what we're doing wrong, and make this work. We also tried measuring the resistance of a huge dollop of paint on the spoon: silver = infinite resistance (!), copper = 200kOhms. It didn't matter if the paint was dried or wet. Note that we shook the bottle prior to use to ensure that the silver particles were dispersed evenly."

Types of Conductive Paint

• Opaque paint
  • Nickel:
    • Higher resistance - ~5-6 ohms per square
    • Cracks when dried and flexed - Desktop Fabrication: Wearable Electronics Circuitry

• • Copper:
    • Higher resistance - ~5 ohms per square, though our hacking yielded different results
    • Reasonably priced - ~$30 for 4 oz from Less EMF Inc.

• • Silver:
    • Low resistance - ~0.1 ohms per square according to Desktop Fabrication: Wearable Electronics Circuitry
    • Expensive - ~$30 for 0.7 oz (20 g) from Less EMF Inc.

• Transparent paint
  • Orgacon from Agfa - conductive, can be flexed, transparent, can be silk-screened

• Alternatives
  • Wire glue - $4 for 0.3 oz
  • Conductive pen

Heeds

• Keep ink wet and workable
• Shake paint well to ensure metal particles are well dispersed

Art Uses

• Paper Circuits by Leah Buckley: conductive paint, magnetic paint, magnets

• Paper printed circuit board by Peter Blasser