TDA8946AJ

From Noisebridge
Revision as of 23:30, 3 April 2017 by (talk | contribs) (functional test board running)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


TDA8946AJ

2 X 15 Watt Bridge-Tied Load (BTL) audio amplifier[edit | edit source]

Rev. 01 March/2002

http://www.nxp.com/documents/data_sheet/TDA8946AJ.pdf

log[edit | edit source]

Aquired functional sample from sidewalk score dead LCD TV, leterally hacked off corner of motherboard, and jumpered chip to power and line level analog audio input. Successfully drives matched speaker pair from same sidewalk tv set. Tested with reasonable volume at 5V ~100mA, also ran directly from 2 18650's in series with 8V combined charge with better volume output. (talk) 06:30, 4 April 2017 (UTC)


specs[edit | edit source]

Error creating thumbnail: Unable to save thumbnail to destination
  1. OUT1-
  2. GND1
  3. VCC1
  4. OUT+
  5. N.C.
  6. IN1+
  7. SGND
  8. IN1-
  9. IN2-
  10. MODE
  11. SVR
  12. IN2+
  13. GC
  14. OUT2-
  15. GND2
  16. VCC2
  17. OUT2+