Laser Gallery

laser cutter in Sparkle Forge

laser cut Noisebridge logo

wood cartoon character

Error creating thumbnail: Unable to save thumbnail to destination

box with living hinges

Error creating thumbnail: Unable to save thumbnail to destination

portrait etch test

Error creating thumbnail: Unable to save thumbnail to destination

etch test

Error creating thumbnail: Unable to save thumbnail to destination

cardboard monitor

Error creating thumbnail: Unable to save thumbnail to destination

acrylic etched pikachu for poker chip tricks

Error creating thumbnail: Unable to save thumbnail to destination

wood etched pikachu

Laser cut cardboard Noisebridge mobiles File: https://gist.github.com/scottyallen/1888e058261fc21f184f6be192bbe131

Storage box assembled without glue. Scotty: "Seems like .4mm kerf is the magic number in fusion 360 to get snug enough fit that you can hammer it together with a mallet" File: https://gist.github.com/scottyallen/b244dc3fedcbf2862847adce4e4c9d2f

Wood springs

Cardboard laser cutting test, front side. The top numbers are % power, and the numbers down the side are speed.

Cardboard laser cutting test, front side. The top numbers are % power, and the numbers down the side are speed. Note how the back is not cut through all the way on some tests.