Skylights: Difference between revisions

From Noisebridge
Jump to navigation Jump to search
Lxpk (talk | contribs)
No edit summary
Lxpk (talk | contribs)
No edit summary
Line 1: Line 1:
{{272}}
{{272}}
{{blackbox}}
{{blackbox}}
[[File:Skylight-Box-Cover.jpg|300px]]
You are standing at the skylights on the [[roof]] at 272 Capp Street. You probably shouldn't be up here without a good reason.
You are standing at the skylights on the [[roof]] at 272 Capp Street. You probably shouldn't be up here without a good reason.



Revision as of 15:14, 2 January 2022

Noisebridge | About | Visit | 272 | Manual | Contact | Guilds | Stuff | Events | Projects | Meetings | Donate E
272 Capp St. | Layout | Exits | Bathrooms | Network | Audio | AV | Construction | Electrical | Storage

STREET | Patio | Parking | Fence | Access | Gate | Payphone | Doorbell | Back patio | Roof | Neighbors
DOWNSTAIRS | Entrance | Stairs | Roll up door | Front | Print Shop | Arcade | Cafe |
Hackitorium | Stage | Electronics Bench | Wood Shop | Back hall | Metal Shop | Back Stairs |
UPSTAIRS | Lounge | Music | Electronics | Classrooms | Lockers | Privacy Booth | Fire escape | Plants | Sustenance | Housekeeping

E

You are standing at the skylights on the roof at 272 Capp Street. You probably shouldn't be up here without a good reason.

EXITS: Roof

>

Dimensions (in inches) for the roof opening and base mounting box. As measured for the South skylight in the middle room.

  • Inner Opening
    • 19 1/2 x 92 3/4
  • Outer Box on Roof
    • 26 x 98 1/4
  • Skylight Frame
    • 28 x 100
  • Box Base Curve to flat of roof
    • 30 x 100

January 29th, 2021

The temporary fixes held up to a few days of weather, and today provided for a break in the weather for further maintenance.

The ends of the skylight frame were screwed in to the roof using self-tapping zinc coated screws. This was for the sewing room skylight that had come loose twice and was temporarily secured with bungees.

One end of the skylight was secured with screws the same as the sewing room skylight. The other end of the frame left a larger gap, and a interim wood spacer was used along with longer screws to secure the other end. Some spray paint was used to add some level of weather resistance to the wood.


January 26th, 2021

The skylight that had blown off in the electronics room was still in place, however the one that came loose in the sewing room was found ajar, and rain was falling directly in to the room creating a small puddle. This was mopped up and the skylight was put back in place and additionally temporarily secured with bungee cords and weights until a break in the storm would allow day light access and further repair.


January 20th, 2021

Two of the roof skylights were found blown off of their mounts on the roof, inspected and put back in place.