|
|
| Line 41: |
Line 41: |
|
| |
|
| == dmesg == | | == dmesg == |
| | | [[Pony/dmesg]] |
| [ 0.000000] Initializing cgroup subsys cpuset
| |
| [ 0.000000] Initializing cgroup subsys cpu
| |
| [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
| |
| [ 0.000000] BIOS-provided physical RAM map:
| |
| [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000099400 (usable)
| |
| [ 0.000000] BIOS-e820: 0000000000099400 - 00000000000a0000 (reserved)
| |
| [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
| |
| [ 0.000000] BIOS-e820: 0000000000100000 - 000000006fee0000 (usable)
| |
| [ 0.000000] BIOS-e820: 000000006fee0000 - 000000006fee3000 (ACPI NVS)
| |
| [ 0.000000] BIOS-e820: 000000006fee3000 - 000000006fef0000 (ACPI data)
| |
| [ 0.000000] BIOS-e820: 000000006fef0000 - 000000006ff00000 (reserved)
| |
| [ 0.000000] BIOS-e820: 0000000070000000 - 0000000080000000 (reserved)
| |
| [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
| |
| [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
| |
| [ 0.000000] 894MB HIGHMEM available.
| |
| [ 0.000000] 896MB LOWMEM available.
| |
| [ 0.000000] found SMP MP-table at [c00f56f0] 000f56f0
| |
| [ 0.000000] Entering add_active_range(0, 0, 458464) 0 entries of 256 used
| |
| [ 0.000000] Zone PFN ranges:
| |
| [ 0.000000] DMA 0 -> 4096
| |
| [ 0.000000] Normal 4096 -> 229376
| |
| [ 0.000000] HighMem 229376 -> 458464
| |
| [ 0.000000] Movable zone start PFN for each node
| |
| [ 0.000000] early_node_map[1] active PFN ranges
| |
| [ 0.000000] 0: 0 -> 458464
| |
| [ 0.000000] On node 0 totalpages: 458464
| |
| [ 0.000000] DMA zone: 32 pages used for memmap
| |
| [ 0.000000] DMA zone: 0 pages reserved
| |
| [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
| |
| [ 0.000000] Normal zone: 1760 pages used for memmap
| |
| [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
| |
| [ 0.000000] HighMem zone: 1790 pages used for memmap
| |
| [ 0.000000] HighMem zone: 227298 pages, LIFO batch:31
| |
| [ 0.000000] Movable zone: 0 pages used for memmap
| |
| [ 0.000000] DMI 2.5 present.
| |
| [ 0.000000] ACPI: RSDP 000F7280, 0024 (r2 Nvidia)
| |
| [ 0.000000] ACPI: XSDT 6FEE3100, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
| |
| [ 0.000000] ACPI: FACP 6FEED400, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0)
| |
| [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20080321]
| |
| [ 0.000000] ACPI: DSDT 6FEE3280, A113 (r1 NVIDIA ASUSACPI 1000 MSFT 3000000)
| |
| [ 0.000000] ACPI: FACS 6FEE0A80, 0040
| |
| [ 0.000000] ACPI: SSDT 6FEED640, 0616 (r1 PTLTD POWERNOW 1 LTP 1)
| |
| [ 0.000000] ACPI: HPET 6FEEDCC0, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98)
| |
| [ 0.000000] ACPI: MCFG 6FEEDD40, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
| |
| [ 0.000000] ACPI: APIC 6FEED540, 008E (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
| |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
| |
| [ 0.000000] ACPI: Local APIC address 0xfee00000
| |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
| |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
| |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
| |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
| |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
| |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
| |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
| |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
| |
| [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
| |
| [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
| |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
| |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
| |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
| |
| [ 0.000000] ACPI: IRQ0 used by override.
| |
| [ 0.000000] ACPI: IRQ2 used by override.
| |
| [ 0.000000] ACPI: IRQ9 used by override.
| |
| [ 0.000000] ACPI: IRQ14 used by override.
| |
| [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
| |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
| |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information
| |
| [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
| |
| [ 0.000000] PM: Registered nosave memory: 0000000000099000 - 000000000009a000
| |
| [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
| |
| [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
| |
| [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
| |
| [ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
| |
| [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
| |
| [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4
| |
| [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454882
| |
| [ 0.000000] Kernel command line: root=/dev/sda5 ro
| |
| [ 0.000000] mapped APIC to ffffb000 (fee00000)
| |
| [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
| |
| [ 0.000000] Enabling fast FPU save and restore... done.
| |
| [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
| |
| [ 0.000000] Initializing CPU#0
| |
| [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
| |
| [ 0.000000] Extended CMOS year: 2000
| |
| [ 0.000000] Detected 2099.997 MHz processor.
| |
| [ 0.004000] spurious 8259A interrupt: IRQ7.
| |
| [ 0.004000] Console: colour VGA+ 80x25
| |
| [ 0.004000] console [tty0] enabled
| |
| [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
| |
| [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
| |
| [ 0.004000] Memory: 1807948k/1833856k available (1769k kernel code, 24600k reserved, 752k data, 244k init, 916352k highmem)
| |
| [ 0.004000] virtual kernel memory layout:
| |
| [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
| |
| [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
| |
| [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
| |
| [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
| |
| [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
| |
| [ 0.004000] .data : 0xc02ba4ab - 0xc0376620 ( 752 kB)
| |
| [ 0.004000] .text : 0xc0100000 - 0xc02ba4ab (1769 kB)
| |
| [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
| |
| [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
| |
| [ 0.004000] hpet clockevent registered
| |
| [ 0.083901] Calibrating delay using timer specific routine.. 4204.51 BogoMIPS (lpj=8409038)
| |
| [ 0.084005] Security Framework initialized
| |
| [ 0.084005] SELinux: Disabled at boot.
| |
| [ 0.084005] Capability LSM initialized
| |
| [ 0.084005] Mount-cache hash table entries: 512
| |
| [ 0.084005] Initializing cgroup subsys ns
| |
| [ 0.084005] Initializing cgroup subsys cpuacct
| |
| [ 0.084005] Initializing cgroup subsys devices
| |
| [ 0.084005] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
| |
| [ 0.084005] CPU: L2 Cache: 512K (64 bytes/line)
| |
| [ 0.084005] CPU 0(3) -> Core 0
| |
| [ 0.084005] Intel machine check architecture supported.
| |
| [ 0.084005] Intel machine check reporting enabled on CPU#0.
| |
| [ 0.084005] Checking 'hlt' instruction... OK.
| |
| [ 0.100006] ACPI: Core revision 20080321
| |
| [ 0.116007] ENABLING IO-APIC IRQs
| |
| [ 0.116007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
| |
| [ 0.155739] CPU0: AMD Phenom(tm) 8450 Triple-Core Processor stepping 03
| |
| [ 0.155975] Booting processor 1/1 ip 6000
| |
| [ 0.164010] Initializing CPU#1
| |
| [ 0.164010] Calibrating delay using timer specific routine.. 4200.66 BogoMIPS (lpj=8401324)
| |
| [ 0.164010] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
| |
| [ 0.164010] CPU: L2 Cache: 512K (64 bytes/line)
| |
| [ 0.164010] CPU 1(3) -> Core 1
| |
| [ 0.164010] AMD C1E detected late. Force timer broadcast.
| |
| [ 0.164010] Intel machine check architecture supported.
| |
| [ 0.164010] Intel machine check reporting enabled on CPU#1.
| |
| [ 0.244015] CPU1: AMD Phenom(tm) 8450 Triple-Core Processor stepping 03
| |
| [ 0.244015] Booting processor 2/2 ip 6000
| |
| [ 0.252015] Initializing CPU#2
| |
| [ 0.252015] Calibrating delay using timer specific routine.. 4200.51 BogoMIPS (lpj=8401024)
| |
| [ 0.252015] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
| |
| [ 0.252015] CPU: L2 Cache: 512K (64 bytes/line)
| |
| [ 0.252015] CPU 2(3) -> Core 2
| |
| [ 0.252015] AMD C1E detected late. Force timer broadcast.
| |
| [ 0.252015] Intel machine check architecture supported.
| |
| [ 0.252015] Intel machine check reporting enabled on CPU#2.
| |
| [ 0.335194] CPU2: AMD Phenom(tm) 8450 Triple-Core Processor stepping 03
| |
| [ 0.335750] Brought up 3 CPUs
| |
| [ 0.335802] Total of 3 processors activated (12605.69 BogoMIPS).
| |
| [ 0.335891] CPU0 attaching sched-domain:
| |
| [ 0.335893] domain 0: span 0-2
| |
| [ 0.335895] groups: 0 1 2
| |
| [ 0.335899] CPU1 attaching sched-domain:
| |
| [ 0.335901] domain 0: span 0-2
| |
| [ 0.335903] groups: 1 2 0
| |
| [ 0.335906] CPU2 attaching sched-domain:
| |
| [ 0.335908] domain 0: span 0-2
| |
| [ 0.335909] groups: 2 0 1
| |
| [ 0.336021] net_namespace: 660 bytes
| |
| [ 0.336021] Booting paravirtualized kernel on bare hardware
| |
| [ 0.336021] NET: Registered protocol family 16
| |
| [ 0.336021] ACPI: bus type pci registered
| |
| [ 0.336021] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
| |
| [ 0.336021] PCI: MCFG area at f0000000 reserved in E820
| |
| [ 0.336021] PCI: Using MMCONFIG for extended config space
| |
| [ 0.336021] PCI: Using configuration type 1 for base access
| |
| [ 0.336021] Setting up standard PCI resources
| |
| [ 0.347224] ACPI: EC: Look up EC in DSDT
| |
| [ 0.364057] ACPI: Interpreter enabled
| |
| [ 0.364057] ACPI: (supports S0 S1 S3 S4 S5)
| |
| [ 0.364273] ACPI: Using IOAPIC for interrupt routing
| |
| [ 0.395073] ACPI: PCI Root Bridge [PCI0] (0000:00)
| |
| [ 0.396630] PCI: Transparent bridge - 0000:00:08.0
| |
| [ 0.397185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
| |
| [ 0.397765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
| |
| [ 0.626603] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
| |
| [ 0.627200] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.627860] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.628520] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
| |
| [ 0.629104] ACPI: PCI Interrupt Link [LE0A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.629760] ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.630418] ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.631071] ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.631727] ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 *10 11 14 15)
| |
| [ 0.632318] ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.632972] ACPI: PCI Interrupt Link [LE1C] (IRQs 5 *7 9 10 11 14 15)
| |
| [ 0.633557] ACPI: PCI Interrupt Link [LE1D] (IRQs *5 7 9 10 11 14 15)
| |
| [ 0.634140] ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.634794] ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.635450] ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.636107] ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.636765] ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.637425] ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.638077] ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.638733] ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.639387] ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 *10 11 14 15)
| |
| [ 0.639971] ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.640652] ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.643302] ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.643956] ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.644618] ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.645277] ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.645933] ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.646586] ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.647239] ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.647896] ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.648563] ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.649219] ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.649881] ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.650537] ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.651191] ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.651850] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.652517] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
| |
| [ 0.653101] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.653757] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.654410] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.655063] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.655724] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
| |
| [ 0.656322] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.656977] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15)
| |
| [ 0.657561] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.658215] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
| |
| [ 0.658871] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
| |
| [ 0.659493] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
| |
| [ 0.659978] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
| |
| [ 0.660498] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
| |
| [ 0.661012] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
| |
| [ 0.661491] ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0, disabled.
| |
| [ 0.662003] ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0, disabled.
| |
| [ 0.662515] ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled.
| |
| [ 0.663024] ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled.
| |
| [ 0.663534] ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0
| |
| [ 0.664020] ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled.
| |
| [ 0.664541] ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0
| |
| [ 0.665021] ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0
| |
| [ 0.665504] ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled.
| |
| [ 0.666016] ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled.
| |
| [ 0.666526] ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled.
| |
| [ 0.667038] ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled.
| |
| [ 0.667543] ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled.
| |
| [ 0.668055] ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled.
| |
| [ 0.668591] ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled.
| |
| [ 0.669101] ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled.
| |
| [ 0.669613] ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0
| |
| [ 0.670096] ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled.
| |
| [ 0.670609] ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled.
| |
| [ 0.671122] ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled.
| |
| [ 0.671632] ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled.
| |
| [ 0.672141] ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled.
| |
| [ 0.672657] ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled.
| |
| [ 0.673169] ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled.
| |
| [ 0.673683] ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled.
| |
| [ 0.674193] ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled.
| |
| [ 0.674702] ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled.
| |
| [ 0.675215] ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled.
| |
| [ 0.675731] ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled.
| |
| [ 0.676244] ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled.
| |
| [ 0.676762] ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled.
| |
| [ 0.677271] ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled.
| |
| [ 0.677783] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
| |
| [ 0.678347] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0, disabled.
| |
| [ 0.678943] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0, disabled.
| |
| [ 0.679533] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0, disabled.
| |
| [ 0.680126] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0, disabled.
| |
| [ 0.680730] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
| |
| [ 0.681296] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
| |
| [ 0.681858] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
| |
| [ 0.682457] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
| |
| [ 0.683056] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
| |
| [ 0.683652] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
| |
| [ 0.684245] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
| |
| [ 0.688283] Linux Plug and Play Support v0.97 (c) Adam Belay
| |
| [ 0.688283] pnp: PnP ACPI init
| |
| [ 0.688283] ACPI: bus type pnp registered
| |
| [ 0.698545] pnp: PnP ACPI: found 11 devices
| |
| [ 0.698545] ACPI: ACPI bus type pnp unregistered
| |
| [ 0.698600] PnPBIOS: Disabled by ACPI PNP
| |
| [ 0.702545] PCI: Using ACPI for IRQ routing
| |
| [ 0.710496] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
| |
| [ 0.710545] hpet0: 3 32-bit timers, 25000000 Hz
| |
| [ 0.710545] ACPI: RTC can wake from S4
| |
| [ 0.713159] Clockevents: could not switch to one-shot mode: lapic is not functional.
| |
| [ 0.713264] Could not switch to high resolution mode on CPU 0
| |
| [ 0.713355] system 00:01: ioport range 0x1000-0x107f has been reserved
| |
| [ 0.713416] system 00:01: ioport range 0x1080-0x10ff has been reserved
| |
| [ 0.713476] system 00:01: ioport range 0x1400-0x147f has been reserved
| |
| [ 0.713535] system 00:01: ioport range 0x1480-0x14ff has been reserved
| |
| [ 0.713590] system 00:01: ioport range 0x1800-0x187f has been reserved
| |
| [ 0.713650] system 00:01: ioport range 0x1880-0x18ff has been reserved
| |
| [ 0.713712] system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved
| |
| [ 0.713779] system 00:01: iomem range 0x70000000-0x7fffffff could not be reserved
| |
| [ 0.713857] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
| |
| [ 0.713909] system 00:02: ioport range 0x800-0x87f has been reserved
| |
| [ 0.713962] system 00:02: ioport range 0x290-0x297 has been reserved
| |
| [ 0.714035] system 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
| |
| [ 0.714113] system 00:0a: iomem range 0xdf000-0xdffff has been reserved
| |
| [ 0.714173] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
| |
| [ 0.714233] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
| |
| [ 0.714286] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
| |
| [ 0.714352] system 00:0a: iomem range 0xfeff0000-0xfeff00ff could not be reserved
| |
| [ 0.714419] system 00:0a: iomem range 0x6fee0000-0x6fefffff could not be reserved
| |
| [ 0.714498] system 00:0a: iomem range 0xffff0000-0xffffffff could not be reserved
| |
| [ 0.714551] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
| |
| [ 0.714551] system 00:0a: iomem range 0x100000-0x6fedffff could not be reserved
| |
| [ 0.714551] system 00:0a: iomem range 0x6fff0000-0x7ffeffff could not be reserved
| |
| [ 0.714551] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
| |
| [ 0.714551] system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved
| |
| [ 0.714551] system 00:0a: iomem range 0xfefff000-0xfeffffff could not be reserved
| |
| [ 0.714551] system 00:0a: iomem range 0xfff80000-0xfff80fff could not be reserved
| |
| [ 0.714551] system 00:0a: iomem range 0xfff90000-0xfffbffff could not be reserved
| |
| [ 0.714551] system 00:0a: iomem range 0xfffed000-0xfffeffff could not be reserved
| |
| [ 0.722056] Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
| |
| [ 0.724586] Could not switch to high resolution mode on CPU 1
| |
| [ 0.722056] lapic is not functional.
| |
| [ 0.722056] Could not switch to high resolution mode on CPU 2
| |
| [ 0.752581] PCI: Bridge: 0000:00:08.0
| |
| [ 0.752637] IO window: c000-cfff
| |
| [ 0.752693] MEM window: 0xfde00000-0xfdefffff
| |
| [ 0.752743] PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff
| |
| [ 0.752804] PCI: Bridge: 0000:00:0b.0
| |
| [ 0.752852] IO window: b000-bfff
| |
| [ 0.752906] MEM window: 0xfb000000-0xfcffffff
| |
| [ 0.752955] PREFETCH window: 0x00000000d8000000-0x00000000e7ffffff
| |
| [ 0.753014] PCI: Bridge: 0000:00:10.0
| |
| [ 0.753064] IO window: a000-afff
| |
| [ 0.753123] MEM window: 0xfdc00000-0xfdcfffff
| |
| [ 0.753180] PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff
| |
| [ 0.753246] PCI: Bridge: 0000:00:12.0
| |
| [ 0.753300] IO window: 9000-9fff
| |
| [ 0.753354] MEM window: 0xfda00000-0xfdafffff
| |
| [ 0.753412] PREFETCH window: 0x00000000fd900000-0x00000000fd9fffff
| |
| [ 0.753476] PCI: Bridge: 0000:00:13.0
| |
| [ 0.753530] IO window: 8000-8fff
| |
| [ 0.753589] MEM window: 0xfd800000-0xfd8fffff
| |
| [ 0.753642] PREFETCH window: 0x00000000fd700000-0x00000000fd7fffff
| |
| [ 0.753714] PCI: Bridge: 0000:00:14.0
| |
| [ 0.753763] IO window: 7000-7fff
| |
| [ 0.753822] MEM window: 0xfd600000-0xfd6fffff
| |
| [ 0.753880] PREFETCH window: 0x00000000fd500000-0x00000000fd5fffff
| |
| [ 0.753959] PCI: Setting latency timer of device 0000:00:08.0 to 64
| |
| [ 0.753970] PCI: Setting latency timer of device 0000:00:0b.0 to 64
| |
| [ 0.754043] ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16
| |
| [ 0.756582] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [AE0A] -> GSI 16 (level, low) -> IRQ 16
| |
| [ 0.756724] PCI: Setting latency timer of device 0000:00:10.0 to 64
| |
| [ 0.757203] ACPI: PCI Interrupt Link [AE2A] enabled at IRQ 16
| |
| [ 0.757254] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [AE2A] -> GSI 16 (level, low) -> IRQ 16
| |
| [ 0.757396] PCI: Setting latency timer of device 0000:00:12.0 to 64
| |
| [ 0.757873] ACPI: PCI Interrupt Link [AE3A] enabled at IRQ 16
| |
| [ 0.757924] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [AE3A] -> GSI 16 (level, low) -> IRQ 16
| |
| [ 0.758054] PCI: Setting latency timer of device 0000:00:13.0 to 64
| |
| [ 0.758529] ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16
| |
| [ 0.758580] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [AE4A] -> GSI 16 (level, low) -> IRQ 16
| |
| [ 0.758715] PCI: Setting latency timer of device 0000:00:14.0 to 64
| |
| [ 0.758772] NET: Registered protocol family 2
| |
| [ 0.768902] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
| |
| [ 0.769216] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
| |
| [ 0.769791] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
| |
| [ 0.770093] TCP: Hash tables configured (established 131072 bind 65536)
| |
| [ 0.770153] TCP reno registered
| |
| [ 0.773008] NET: Registered protocol family 1
| |
| [ 0.773158] checking if image is initramfs... it is
| |
| [ 1.194973] Freeing initrd memory: 6031k freed
| |
| [ 1.198969] audit: initializing netlink socket (disabled)
| |
| [ 1.198969] type=2000 audit(1232949417.159:1): initialized
| |
| [ 1.198969] highmem bounce pool size: 64 pages
| |
| [ 1.198969] Total HugeTLB memory allocated, 0
| |
| [ 1.198969] VFS: Disk quotas dquot_6.5.1
| |
| [ 1.198969] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
| |
| [ 1.198969] msgmni has been set to 1754
| |
| [ 1.198969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
| |
| [ 1.198969] io scheduler noop registered
| |
| [ 1.198969] io scheduler anticipatory registered
| |
| [ 1.198969] io scheduler deadline registered
| |
| [ 1.198969] io scheduler cfq registered (default)
| |
| [ 1.267206] pci 0000:00:08.0: Enabling HT MSI Mapping
| |
| [ 1.267206] pci 0000:00:09.0: Enabling HT MSI Mapping
| |
| [ 1.267206] pci 0000:00:0a.0: Enabling HT MSI Mapping
| |
| [ 1.267206] pci 0000:00:0b.0: Enabling HT MSI Mapping
| |
| [ 1.267206] pci 0000:00:10.0: Enabling HT MSI Mapping
| |
| [ 1.267206] pci 0000:00:12.0: Enabling HT MSI Mapping
| |
| [ 1.267206] pci 0000:00:13.0: Enabling HT MSI Mapping
| |
| [ 1.267206] pci 0000:00:14.0: Enabling HT MSI Mapping
| |
| [ 1.267206] pci 0000:02:00.0: Boot video device
| |
| [ 1.267206] PCI: Setting latency timer of device 0000:00:10.0 to 64
| |
| [ 1.267206] assign_interrupt_mode Found MSI capability
| |
| [ 1.267206] Allocate Port Service[0000:00:10.0:pcie00]
| |
| [ 1.267206] PCI: Setting latency timer of device 0000:00:12.0 to 64
| |
| [ 1.267206] assign_interrupt_mode Found MSI capability
| |
| [ 1.267206] Allocate Port Service[0000:00:12.0:pcie00]
| |
| [ 1.267206] PCI: Setting latency timer of device 0000:00:13.0 to 64
| |
| [ 1.267206] assign_interrupt_mode Found MSI capability
| |
| [ 1.267206] Allocate Port Service[0000:00:13.0:pcie00]
| |
| [ 1.267206] PCI: Setting latency timer of device 0000:00:14.0 to 64
| |
| [ 1.267206] assign_interrupt_mode Found MSI capability
| |
| [ 1.267206] Allocate Port Service[0000:00:14.0:pcie00]
| |
| [ 1.270969] isapnp: Scanning for PnP cards...
| |
| [ 1.622967] isapnp: No Plug & Play device found
| |
| [ 1.622967] hpet_resources: 0xfeff0000 is busy
| |
| [ 1.622967] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
| |
| [ 1.626964] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
| |
| [ 1.626964] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
| |
| [ 1.626965] brd: module loaded
| |
| [ 1.626965] PNP: No PS/2 controller found. Probing ports directly.
| |
| [ 1.626965] serio: i8042 KBD port at 0x60,0x64 irq 1
| |
| [ 1.626965] serio: i8042 AUX port at 0x60,0x64 irq 12
| |
| [ 1.626965] mice: PS/2 mouse device common for all mice
| |
| [ 1.626965] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
| |
| [ 1.626965] rtc0: alarms up to one year, y3k
| |
| [ 1.626965] cpuidle: using governor ladder
| |
| [ 1.626965] cpuidle: using governor menu
| |
| [ 1.626965] No iBFT detected.
| |
| [ 1.626965] TCP cubic registered
| |
| [ 1.626965] NET: Registered protocol family 17
| |
| [ 1.630964] Using IPI No-Shortcut mode
| |
| [ 1.630964] registered taskstats version 1
| |
| [ 1.630964] rtc_cmos 00:05: setting system clock to 2009-01-26 05:56:58 UTC (1232949418)
| |
| [ 1.630964] Freeing unused kernel memory: 244k freed
| |
| [ 1.709799] ACPI: PNP0C0B:00 is registered as cooling_device0
| |
| [ 1.709875] ACPI: Fan [FAN] (on)
| |
| [ 1.714352] ACPI: ACPI0007:00 is registered as cooling_device1
| |
| [ 1.714457] ACPI: ACPI0007:01 is registered as cooling_device2
| |
| [ 1.714457] ACPI: ACPI0007:02 is registered as cooling_device3
| |
| [ 1.716544] ACPI: Expecting a [Reference] package element, found type 0
| |
| [ 1.717138] ACPI: LNXTHERM:01 is registered as thermal_zone0
| |
| [ 1.717513] ACPI: Thermal Zone [THRM] (40 C)
| |
| [ 1.910812] usbcore: registered new interface driver usbfs
| |
| [ 1.910886] usbcore: registered new interface driver hub
| |
| [ 1.910968] usbcore: registered new device driver usb
| |
| [ 1.911844] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
| |
| [ 1.912360] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
| |
| [ 1.912418] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23
| |
| [ 1.912551] PCI: Setting latency timer of device 0000:00:02.0 to 64
| |
| [ 1.912554] ohci_hcd 0000:00:02.0: OHCI Host Controller
| |
| [ 1.912740] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
| |
| [ 1.912826] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
| |
| [ 1.924398] No dock devices found.
| |
| [ 1.929960] SCSI subsystem initialized
| |
| [ 1.937413] libata version 3.00 loaded.
| |
| [ 1.952952] natsemi dp8381x driver, version 2.1, Sept 11, 2006
| |
| [ 1.952954] originally by Donald Becker <becker@scyld.com>
| |
| [ 1.952956] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
| |
| [ 1.968726] usb usb1: configuration #1 chosen from 1 choice
| |
| [ 1.968803] hub 1-0:1.0: USB hub found
| |
| [ 1.968856] hub 1-0:1.0: 6 ports detected
| |
| [ 2.071277] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
| |
| [ 2.071336] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
| |
| [ 2.071410] usb usb1: Product: OHCI Host Controller
| |
| [ 2.071467] usb usb1: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
| |
| [ 2.071525] usb usb1: SerialNumber: 0000:00:02.0
| |
| [ 2.074221] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 22
| |
| [ 2.074285] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [AU1B] -> GSI 22 (level, low) -> IRQ 22
| |
| [ 2.074434] PCI: Setting latency timer of device 0000:00:04.0 to 64
| |
| [ 2.074437] ohci_hcd 0000:00:04.0: OHCI Host Controller
| |
| [ 2.074512] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
| |
| [ 2.074600] ohci_hcd 0000:00:04.0: irq 22, io mem 0xfe02d000
| |
| [ 2.131077] usb usb2: configuration #1 chosen from 1 choice
| |
| [ 2.131150] hub 2-0:1.0: USB hub found
| |
| [ 2.131150] hub 2-0:1.0: 6 ports detected
| |
| [ 2.232558] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
| |
| [ 2.232617] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
| |
| [ 2.232691] usb usb2: Product: OHCI Host Controller
| |
| [ 2.232747] usb usb2: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
| |
| [ 2.232805] usb usb2: SerialNumber: 0000:00:04.0
| |
| [ 2.235073] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 21
| |
| [ 2.235073] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [AUB2] -> GSI 21 (level, low) -> IRQ 21
| |
| [ 2.235073] PCI: Setting latency timer of device 0000:00:02.1 to 64
| |
| [ 2.235073] ehci_hcd 0000:00:02.1: EHCI Host Controller
| |
| [ 2.235073] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
| |
| [ 2.235073] ehci_hcd 0000:00:02.1: debug port 1
| |
| [ 2.235073] PCI: cache line size of 64 is not supported by device 0000:00:02.1
| |
| [ 2.235073] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe02e000
| |
| [ 2.247082] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
| |
| [ 2.247211] usb usb3: configuration #1 chosen from 1 choice
| |
| [ 2.247291] hub 3-0:1.0: USB hub found
| |
| [ 2.251072] hub 3-0:1.0: 6 ports detected
| |
| [ 2.355144] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
| |
| [ 2.355203] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
| |
| [ 2.355269] usb usb3: Product: EHCI Host Controller
| |
| [ 2.355318] usb usb3: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
| |
| [ 2.359072] usb usb3: SerialNumber: 0000:00:02.1
| |
| [ 2.359072] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 20
| |
| [ 2.359072] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [AU2B] -> GSI 20 (level, low) -> IRQ 20
| |
| [ 2.359072] PCI: Setting latency timer of device 0000:00:04.1 to 64
| |
| [ 2.359072] ehci_hcd 0000:00:04.1: EHCI Host Controller
| |
| [ 2.359072] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4
| |
| [ 2.359072] ehci_hcd 0000:00:04.1: debug port 1
| |
| [ 2.359072] PCI: cache line size of 64 is not supported by device 0000:00:04.1
| |
| [ 2.359072] ehci_hcd 0000:00:04.1: irq 20, io mem 0xfe02c000
| |
| [ 2.371783] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
| |
| [ 2.371900] usb usb4: configuration #1 chosen from 1 choice
| |
| [ 2.371975] hub 4-0:1.0: USB hub found
| |
| [ 2.372026] hub 4-0:1.0: 6 ports detected
| |
| [ 2.479838] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
| |
| [ 2.479897] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
| |
| [ 2.479963] usb usb4: Product: EHCI Host Controller
| |
| [ 2.480022] usb usb4: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
| |
| [ 2.483772] usb usb4: SerialNumber: 0000:00:04.1
| |
| [ 2.483947] ahci 0000:00:09.0: version 3.0
| |
| [ 2.483947] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
| |
| [ 2.483947] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23
| |
| [ 3.485289] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
| |
| [ 3.485364] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
| |
| [ 3.485418] PCI: Setting latency timer of device 0000:00:09.0 to 64
| |
| [ 3.486188] scsi0 : ahci
| |
| [ 3.486856] scsi1 : ahci
| |
| [ 3.487480] scsi2 : ahci
| |
| [ 3.487941] scsi3 : ahci
| |
| [ 3.487941] scsi4 : ahci
| |
| [ 3.487941] scsi5 : ahci
| |
| [ 3.487941] ata1: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 219
| |
| [ 3.487941] ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 219
| |
| [ 3.487941] ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 219
| |
| [ 3.487941] ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 219
| |
| [ 3.487941] ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 219
| |
| [ 3.487941] ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 219
| |
| [ 3.975949] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
| |
| [ 3.979938] ata1.00: ATA-8: ST3750330AS, SD15, max UDMA/133
| |
| [ 3.979938] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
| |
| [ 3.983845] ata1.00: configured for UDMA/133
| |
| [ 4.303949] ata2: SATA link down (SStatus 0 SControl 300)
| |
| [ 4.627942] ata3: SATA link down (SStatus 0 SControl 300)
| |
| [ 4.951951] ata4: SATA link down (SStatus 0 SControl 300)
| |
| [ 5.275944] ata5: SATA link down (SStatus 0 SControl 300)
| |
| [ 5.599945] ata6: SATA link down (SStatus 0 SControl 300)
| |
| [ 5.603928] scsi 0:0:0:0: Direct-Access ATA ST3750330AS SD15 PQ: 0 ANSI: 5
| |
| [ 5.603933] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
| |
| [ 5.603933] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
| |
| [ 5.603933] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22
| |
| [ 5.603933] PCI: Setting latency timer of device 0000:00:0a.0 to 64
| |
| [ 6.127927] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:22:15:f3:18:1d
| |
| [ 6.127927] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3
| |
| [ 6.131699] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
| |
| [ 6.131699] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
| |
| [ 6.135699] natsemi eth1: NatSemi DP8381[56] at 0xfdeff000 (0000:01:08.0), 00:09:5b:8f:32:c9, IRQ 16, port TP.
| |
| [ 6.135699] sata_sil24 0000:06:00.0: version 1.1
| |
| [ 6.135699] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [AE4A] -> GSI 16 (level, low) -> IRQ 16
| |
| [ 6.135699] PCI: Setting latency timer of device 0000:06:00.0 to 64
| |
| [ 6.135699] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
| |
| [ 6.135699] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
| |
| [ 6.138040] scsi6 : sata_sil24
| |
| [ 6.138150] scsi7 : sata_sil24
| |
| [ 6.138221] ata7: SATA max UDMA/100 host m128@0xfd6ff000 port 0xfd6f8000 irq 16
| |
| [ 6.138294] ata8: SATA max UDMA/100 host m128@0xfd6ff000 port 0xfd6fa000 irq 16
| |
| [ 6.187223] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fdefe000-fdefe7ff] Max Packet=[2048] IR/IT contexts=[8/8]
| |
| [ 6.195429] Uniform Multi-Platform E-IDE driver
| |
| [ 6.195429] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
| |
| [ 6.210743] Driver 'sd' needs updating - please use bus_type methods
| |
| [ 6.210880] sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
| |
| [ 6.210955] sd 0:0:0:0: [sda] Write Protect is off
| |
| [ 6.211005] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
| |
| [ 6.211020] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
| |
| [ 6.211129] sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
| |
| [ 6.211202] sd 0:0:0:0: [sda] Write Protect is off
| |
| [ 6.211252] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
| |
| [ 6.211266] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
| |
| [ 6.211336] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 >
| |
| [ 6.334962] sd 0:0:0:0: [sda] Attached SCSI disk
| |
| [ 7.472310] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c00017a4bb2]
| |
| [ 8.344169] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
| |
| [ 8.348141] ata7.15: Port Multiplier 1.1, 0x1095:0x4726 r31, 7 ports, feat 0x1/0x9
| |
| [ 8.348141] ata7.00: hard resetting link
| |
| [ 8.672137] ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
| |
| [ 8.672137] ata7.01: hard resetting link
| |
| [ 8.996134] ata7.01: SATA link down (SStatus 0 SControl 320)
| |
| [ 8.996134] ata7.02: hard resetting link
| |
| [ 9.320131] ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
| |
| [ 9.320131] ata7.03: hard resetting link
| |
| [ 9.644126] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
| |
| [ 9.644126] ata7.04: hard resetting link
| |
| [ 9.968124] ata7.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
| |
| [ 9.968124] ata7.05: hard resetting link
| |
| [ 10.292119] ata7.05: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
| |
| [ 10.292119] ata7.06: hard resetting link
| |
| [ 10.616116] ata7.06: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
| |
| [ 10.616116] ata7.00: ATA-8: ST3750330AS, SD15, max UDMA/133
| |
| [ 10.616116] ata7.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
| |
| [ 10.620116] ata7.00: configured for UDMA/100
| |
| [ 10.624118] ata7.02: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133
| |
| [ 10.624118] ata7.02: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
| |
| [ 10.624118] ata7.02: configured for UDMA/100
| |
| [ 10.628115] ata7.03: ATA-6: ST380013AS, 3.05, max UDMA/133
| |
| [ 10.628115] ata7.03: 156301488 sectors, multi 0: LBA48
| |
| [ 10.632116] ata7.03: configured for UDMA/100
| |
| [ 10.744124] ata7.04: failed to IDENTIFY (I/O error, err_mask=0x11)
| |
| [ 10.744182] ata7.15: hard resetting link
| |
| [ 10.744235] ata7: controller in dubious state, performing PORT_RST
| |
| [ 12.976120] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
| |
| [ 12.980092] ata7.00: hard resetting link
| |
| [ 13.304091] ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
| |
| [ 13.304091] ata7.01: hard resetting link
| |
| [ 13.628086] ata7.01: SATA link down (SStatus 0 SControl 320)
| |
| [ 13.628086] ata7.02: hard resetting link
| |
| [ 13.952085] ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
| |
| [ 13.952085] ata7.03: hard resetting link
| |
| [ 14.276081] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
| |
| [ 14.276081] ata7.04: hard resetting link
| |
| [ 14.600077] ata7.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
| |
| [ 14.600077] ata7.05: hard resetting link
| |
| [ 14.924073] ata7.05: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
| |
| [ 14.924073] ata7.06: hard resetting link
| |
| [ 15.248069] ata7.06: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
| |
| [ 15.252070] ata7.00: configured for UDMA/100
| |
| [ 15.263834] ata7.02: configured for UDMA/100
| |
| [ 15.267972] ata7.03: configured for UDMA/100
| |
| [ 15.384075] ata7.04: failed to IDENTIFY (I/O error, err_mask=0x11)
| |
| [ 15.384127] ata7.15: hard resetting link
| |
| [ 15.384175] ata7: controller in dubious state, performing PORT_RST
| |
| [ 17.616075] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
| |
| [ 17.620046] ata7.00: hard resetting link
| |
| [ 17.944043] ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
| |
| [ 17.944043] ata7.01: hard resetting link
| |
| [ 18.268039] ata7.01: SATA link down (SStatus 0 SControl 320)
| |
| [ 18.268039] ata7.02: hard resetting link
| |
| [ 18.592035] ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
| |
| [ 18.592035] ata7.03: hard resetting link
| |
| [ 18.916033] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
| |
| [ 18.916033] ata7.04: hard resetting link
| |
| [ 19.240022] ata7.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
| |
| [ 19.240022] ata7.05: hard resetting link
| |
| [ 19.564028] ata7.05: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
| |
| [ 19.564028] ata7.06: hard resetting link
| |
| [ 19.888023] ata7.06: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
| |
| [ 19.892023] ata7.00: configured for UDMA/100
| |
| [ 19.900026] ata7.02: configured for UDMA/100
| |
| [ 19.908023] ata7.03: configured for UDMA/100
| |
| [ 19.908023] ata7.04: ATA-8: ST3750330AS, SD15, max UDMA/133
| |
| [ 19.908023] ata7.04: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
| |
| [ 19.912025] ata7.04: configured for UDMA/100
| |
| [ 19.912025] ata7.05: unsupported device, disabling
| |
| [ 19.912025] ata7.05: disabled
| |
| [ 19.912025] ata7: EH complete
| |
| [ 21.992022] ata8: SATA link down (SStatus 0 SControl 0)
| |
| [ 21.995918] scsi 6:0:0:0: Direct-Access ATA ST3750330AS SD15 PQ: 0 ANSI: 5
| |
| [ 21.996073] sd 6:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
| |
| [ 21.996155] sd 6:0:0:0: [sdb] Write Protect is off
| |
| [ 21.996169] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
| |
| [ 21.996170] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
| |
| [ 21.996170] sd 6:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
| |
| [ 21.996170] sd 6:0:0:0: [sdb] Write Protect is off
| |
| [ 21.996170] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
| |
| [ 21.996170] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
| |
| [ 21.996170] sdb: sdb1
| |
| [ 22.028074] sd 6:0:0:0: [sdb] Attached SCSI disk
| |
| [ 22.028074] scsi 6:2:0:0: Direct-Access ATA WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5
| |
| [ 22.028074] sd 6:2:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
| |
| [ 22.028074] sd 6:2:0:0: [sdc] Write Protect is off
| |
| [ 22.028074] sd 6:2:0:0: [sdc] Mode Sense: 00 3a 00 00
| |
| [ 22.028074] sd 6:2:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
| |
| [ 22.028074] sd 6:2:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
| |
| [ 22.028074] sd 6:2:0:0: [sdc] Write Protect is off
| |
| [ 22.028074] sd 6:2:0:0: [sdc] Mode Sense: 00 3a 00 00
| |
| [ 22.028074] sd 6:2:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
| |
| [ 22.028074] sdc: sdc1
| |
| [ 22.028074] sd 6:2:0:0: [sdc] Attached SCSI disk
| |
| [ 22.028074] scsi 6:3:0:0: Direct-Access ATA ST380013AS 3.05 PQ: 0 ANSI: 5
| |
| [ 22.028074] sd 6:3:0:0: [sdd] 156301488 512-byte hardware sectors (80026 MB)
| |
| [ 22.028074] sd 6:3:0:0: [sdd] Write Protect is off
| |
| [ 22.028074] sd 6:3:0:0: [sdd] Mode Sense: 00 3a 00 00
| |
| [ 22.028074] sd 6:3:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
| |
| [ 22.028074] sd 6:3:0:0: [sdd] 156301488 512-byte hardware sectors (80026 MB)
| |
| [ 22.028074] sd 6:3:0:0: [sdd] Write Protect is off
| |
| [ 22.028074] sd 6:3:0:0: [sdd] Mode Sense: 00 3a 00 00
| |
| [ 22.028074] sd 6:3:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
| |
| [ 22.028074] sdd: sdd1
| |
| [ 22.028074] sd 6:3:0:0: [sdd] Attached SCSI disk
| |
| [ 22.028074] scsi 6:4:0:0: Direct-Access ATA ST3750330AS SD15 PQ: 0 ANSI: 5
| |
| [ 22.028074] sd 6:4:0:0: [sde] 1465149168 512-byte hardware sectors (750156 MB)
| |
| [ 22.028074] sd 6:4:0:0: [sde] Write Protect is off
| |
| [ 22.028074] sd 6:4:0:0: [sde] Mode Sense: 00 3a 00 00
| |
| [ 22.028074] sd 6:4:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
| |
| [ 22.028074] sd 6:4:0:0: [sde] 1465149168 512-byte hardware sectors (750156 MB)
| |
| [ 22.033608] sd 6:4:0:0: [sde] Write Protect is off
| |
| [ 22.033608] sd 6:4:0:0: [sde] Mode Sense: 00 3a 00 00
| |
| [ 22.033608] sd 6:4:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
| |
| [ 22.033608] sde: sde1
| |
| [ 22.048076] sd 6:4:0:0: [sde] Attached SCSI disk
| |
| [ 22.050423] NFORCE-MCP77: 0000:00:06.0 (rev a1) UDMA133 controller
| |
| [ 22.050480] NFORCE-MCP77: IDE controller (0x10de:0x0759 rev 0xa1) at PCI slot 0000:00:06.0
| |
| [ 22.050566] NFORCE-MCP77: not 100% native mode: will probe irqs later
| |
| [ 22.050624] NFORCE-MCP77: IDE port disabled
| |
| [ 22.050676] ide0: BM-DMA at 0xf000-0xf007
| |
| [ 22.050727] Probing IDE interface ide0...
| |
| [ 22.051837] udev: renamed network interface eth0 to eth1
| |
| [ 22.062092] udev: renamed network interface eth1_rename to eth0
| |
| [ 22.786370] hda: HITACHI DVD-ROM GD-2500, ATAPI CD/DVD-ROM drive
| |
| [ 23.122307] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
| |
| [ 23.122853] hda: MWDMA2 mode selected
| |
| [ 23.123289] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
| |
| [ 23.140424] hda: ATAPI 24X DVD-ROM drive, 512kB Cache
| |
| [ 23.140592] Uniform CD-ROM driver Revision: 3.20
| |
| [ 23.207561] PM: Starting manual resume from disk
| |
| [ 23.254539] kjournald starting. Commit interval 5 seconds
| |
| [ 23.254539] EXT3-fs: mounted filesystem with ordered data mode.
| |
| [ 24.020642] udevd version 125 started
| |
| [ 24.366012] input: Power Button (FF) as /class/input/input0
| |
| [ 24.386009] ACPI: Power Button (FF) [PWRF]
| |
| [ 24.386009] input: Power Button (CM) as /class/input/input1
| |
| [ 24.418009] ACPI: Power Button (CM) [PWRB]
| |
| [ 24.619876] ACPI: WMI: Mapper loaded
| |
| [ 24.722006] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
| |
| [ 24.724479] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
| |
| [ 24.802641] input: PC Speaker as /class/input/input2
| |
| [ 24.999399] Error: Driver 'pcspkr' is already registered, aborting...
| |
| [ 25.360533] Adding 7815580k swap on /dev/sda6. Priority:-1 extents:1 across:7815580k
| |
| [ 25.650030] EXT3 FS on sda5, internal journal
| |
| [ 26.226842] loop: module loaded
| |
| [ 29.171250] kjournald starting. Commit interval 5 seconds
| |
| [ 29.171844] EXT3 FS on sda1, internal journal
| |
| [ 29.171844] EXT3-fs: mounted filesystem with ordered data mode.
| |
| [ 29.226248] kjournald starting. Commit interval 5 seconds
| |
| [ 29.227842] EXT3 FS on sda8, internal journal
| |
| [ 29.227842] EXT3-fs: mounted filesystem with ordered data mode.
| |
| [ 29.291250] kjournald starting. Commit interval 5 seconds
| |
| [ 29.291963] EXT3 FS on sda7, internal journal
| |
| [ 29.292047] EXT3-fs: mounted filesystem with ordered data mode.
| |
| [ 29.359119] kjournald starting. Commit interval 5 seconds
| |
| [ 29.359842] EXT3 FS on sda9, internal journal
| |
| [ 29.359842] EXT3-fs: mounted filesystem with ordered data mode.
| |
| [ 29.462657] kjournald starting. Commit interval 5 seconds
| |
| [ 29.463845] EXT3 FS on sda11, internal journal
| |
| [ 29.463845] EXT3-fs: mounted filesystem with ordered data mode.
| |
| [ 29.527761] kjournald starting. Commit interval 5 seconds
| |
| [ 29.527843] EXT3 FS on sda10, internal journal
| |
| [ 29.527848] EXT3-fs: mounted filesystem with ordered data mode.
| |
| [ 29.598648] kjournald starting. Commit interval 5 seconds
| |
| [ 29.599930] EXT3 FS on sda12, internal journal
| |
| [ 29.599930] EXT3-fs: mounted filesystem with ordered data mode.
| |
| [ 29.671230] kjournald starting. Commit interval 5 seconds
| |
| [ 29.671930] EXT3 FS on sda14, internal journal
| |
| [ 29.671930] EXT3-fs: mounted filesystem with ordered data mode.
| |
| [ 29.735461] kjournald starting. Commit interval 5 seconds
| |
| [ 29.735695] EXT3 FS on sda13, internal journal
| |
| [ 29.735695] EXT3-fs: mounted filesystem with ordered data mode.
| |
| [ 29.753404] kjournald starting. Commit interval 5 seconds
| |
| [ 29.755689] EXT3 FS on sdc1, internal journal
| |
| [ 29.755689] EXT3-fs: mounted filesystem with ordered data mode.
| |
| [ 29.782589] kjournald starting. Commit interval 5 seconds
| |
| [ 29.783931] EXT3 FS on sdb1, internal journal
| |
| [ 29.783931] EXT3-fs: mounted filesystem with ordered data mode.
| |
| [ 29.811323] kjournald starting. Commit interval 5 seconds
| |
| [ 29.815957] EXT3 FS on sde1, internal journal
| |
| [ 29.815957] EXT3-fs: mounted filesystem with ordered data mode.
| |
| [ 32.797359] NET: Registered protocol family 10
| |
| [ 32.797359] lo: Disabled Privacy Extensions
| |
| [ 43.266589] eth1: no IPv6 routers present
| |