Connex 350: Difference between revisions

From Noisebridge
Jump to navigation Jump to search
No edit summary
(updated to show problems and deleted the copied material from stratasys website and clutter. Added new info)
Line 1: Line 1:
{{3dprinting}}
{{3dprinting}}
{{big}}'''The Stratasys Connex Objet350''' is our very big multifilament printer which is currently undergoing repairs.
{{big}}'''The Stratasys Connex Objet350''' is our very big multifilament printer which is currently undergoing repairs.
*'''MAINTAINERS:''' [[User:Pyconaut]]
*'''MAINTAINERS:''' [[User:Pyconaut]] [[User:Magnet]]
*'''DOCUMENTATION:''' [https://www.stratasys.com/3d-printers/objet-350-500-connex3 Stratasys specs]
*'''DOCUMENTATION:''' [https://www.stratasys.com/3d-printers/objet-350-500-connex3 Stratasys specs] [Large Stratasys dump torrent (Contact Magnet)]
*'''STATUS:''' Not yet operational. Needs repaired temperature sensor.
*'''STATUS:''' Not yet operational. Needs repaired temperature sensor.
{{/big}}
{{/big}}


===The World’s First Multi-Material 3D Printing System===
===Current Problems===


The Objet Connex350™ features Objet’s pioneering multi-material 3D printing capability with an intermediate-size build tray of 350 x 350 x 200mm. It enables designers and engineers to rapidly build prototypes to simulate their intended end-product closer than any other technology.
* Cant maintain proper pressure (auto turnoff)
    Vacuum broken (improbable)
    Cracked Cable (likely)
* Flooded Vaccum (cleaned out)
* Maggots in the lining
* One print head not receiving proper voltage
      Broken head
      Messed main board
      Messed up wiring
* One head wont light up
      Broken head
      Not plugged in properly
      Gunk in contacts
* Maybe temperature sensor broken (previous maintainers said so)
      Unknown reason


===What’s Unique about Objet Connex 350?===
===What is it===
Like the larger Objet Connex500, the Objet Connex350 features simultaneous multi-material jetting technology. This enables users to print models made of up to 14 different materials, in a single print job. The system is ideal for designers and engineers looking to effectively highlight the varying material components in complex or assembled products.


===Freedom to Select your Own Materials===
The Objet Connex350™ features Objet’s pioneering multi-material 3D printing capability with an intermediate-size build tray of 350 x 350 x 200mm. It enables designers and engineers to rapidly build prototypes to simulate their intended end-product closer than any other technology.
 
From an unrivalled range of over 60 materials including up to 51 Digital Materials™, the Objet Connex350 allows users to simulate diverse mechanical and physical properties, from rubber to rigid; opaque to transparent; and standard to ABS-grade engineering plastics.
 
===Superb Productivity===


The Objet Connex 350 features:
The Objet Connex 350 features:
Line 31: Line 40:
* Easy-to-remove support material enabling complex geometries
* Easy-to-remove support material enabling complex geometries
* Office convenience– Quiet system, using fully-sealed REACH compliant cartridges that are easy to load and unload
* Office convenience– Quiet system, using fully-sealed REACH compliant cartridges that are easy to load and unload
===Most work done and organization done in Slack===

Revision as of 21:36, 3 February 2023

Noisebridge | About | Visit | 272 | Manual | Contact | Guilds | Stuff | Events | Projects | Meetings | Donate E
Guilds (Volunteer) | Maintainers | Meta | Code | Electronics | Fabrication | Games | Sewing | Music | AI | Neuro | Philosophy | Funding | Art | Security | Ham | WGs E
Fabrication | Sewing | 3D Printing | Print Shop | Wood Shop | Metal Shop | SparkleForge | Laser Cutter | Vinyl Cutter V · T · E
3D Printing | Notes V · T · E


The Stratasys Connex Objet350 is our very big multifilament printer which is currently undergoing repairs.

Current Problems

  • Cant maintain proper pressure (auto turnoff)
    Vacuum broken (improbable)
    Cracked Cable (likely)
  • Flooded Vaccum (cleaned out)
  • Maggots in the lining
  • One print head not receiving proper voltage
     Broken head
     Messed main board
     Messed up wiring
  • One head wont light up
     Broken head
     Not plugged in properly
     Gunk in contacts
  • Maybe temperature sensor broken (previous maintainers said so)
     Unknown reason

What is it

The Objet Connex350™ features Objet’s pioneering multi-material 3D printing capability with an intermediate-size build tray of 350 x 350 x 200mm. It enables designers and engineers to rapidly build prototypes to simulate their intended end-product closer than any other technology.

The Objet Connex 350 features:

  • Multi-material models – eliminating the need to design, print and glue separate model elements together
  • Different parts. Different materials. Same tray – saves time and serves multiple requirements simultaneously
  • Outstanding 16-micron, high-resolution print layer accuracy
  • 600 DPI X & Y resolution
  • Thin walls down to 0.6mm (0.024″)
  • High throughput – Up to 20mm per hour per strip
  • Reliability and robustness – at least 72 hours of non-stop build capacity
  • High speed – simultaneously print multiple items of different materials; models cure while printing; models can be handled immediately after print
  • Easy-to-remove support material enabling complex geometries
  • Office convenience– Quiet system, using fully-sealed REACH compliant cartridges that are easy to load and unload


Most work done and organization done in Slack

Retrieved from "https://replica-wiki.extremist.software/index.php?title=Connex_350&oldid=80466"