Connex 350

3D Printing | Notes

V · T · E

The Stratasys Connex Objet350 is our very big multifilament printer which is currently undergoing repairs. MAINTAINERS: User:Pyconaut User:Magnet DOCUMENTATION: Stratasys specs [Large Stratasys dump torrent (Contact Magnet)] STATUS: Not yet operational. Needs repaired temperature sensor.

Current Problems

  Cant maintain proper pressure (auto turnoff)
   -Vacuum broken (improbable)
   -Cracked Cable (likely)
   -Flooded Vaccum (cleaned out)
   Maggots in the lining
  One print head not receiving proper voltage
   -Broken head
   -Messed main board
   -Messed up wiring
  One head wont light up
    -Broken head
    -Not plugged in properly
    -Gunk in contacts
  Maybe temperature sensor broken (previous maintainers said so)
    -Unknown reason

What is it

The Objet Connex350™ features Objet’s pioneering multi-material 3D printing capability with an intermediate-size build tray of 350 x 350 x 200mm. It enables designers and engineers to rapidly build prototypes to simulate their intended end-product closer than any other technology.

The Objet Connex 350 features:

• Multi-material models – eliminating the need to design, print and glue separate model elements together
• Different parts. Different materials. Same tray – saves time and serves multiple requirements simultaneously
• Outstanding 16-micron, high-resolution print layer accuracy
• 600 DPI X & Y resolution
• Thin walls down to 0.6mm (0.024″)
• High throughput – Up to 20mm per hour per strip
• Reliability and robustness – at least 72 hours of non-stop build capacity
• High speed – simultaneously print multiple items of different materials; models cure while printing; models can be handled immediately after print
• Easy-to-remove support material enabling complex geometries
• Office convenience– Quiet system, using fully-sealed REACH compliant cartridges that are easy to load and unload